The Pedal Board System from CIOKS is a modular range of aluminium profiles dedicated to furnish a flight case for effect pedals. One module is 13cm wide corresponding approximately to one pedals width. There are two types of profiles - single level or two level ones. The single level profiles are available in 1- or 2-module width for use with volume or wha-wha pedals. Two level ones are for regular pedals you can have in two rows. On the pictures below you can see a 5-module two level profile combined with a 2-module single level profile built into a flight case. This way of setting up your effect pedals looks professional and the shiny aluminium glitters in the lights on stage.
There are two main ways of attaching your pedals to the profiles. The best and most durable one is by fastening the pedals from the back of the profile with screws. This way is recommended for musicians that don't change their setup or do it very rare. The other one is by using the Dual Lock tape from the company 3M.
The two level profiles are fitted with rectangular holes for cables which make it easy to create a tidy interconnection between your effects. Below you can see the anniversary power supply Blue Jean used on the board. The optional Signal Interface is showed on the right below. In this case four Neutrik sockets are used as two guitar inputs and two amplifier outputs. The Board System can also be equipped with a Mains Interface. It's a very durable rubber mains cable fitted with a socket with 4 mains outlets. The socket is placed below the elevated part of the two level profile.
CIOKS Pedal Board System can only be purchased directly from CIOKS. It's available as profiles only but a fully equipped pedal case including the effects and flight case can also be ordered as a custom project. Please send your inquiry to: sales@cioks.com